Henry Araujo (talk | contribs) (File added via photo placeholder) |
Henry Araujo (talk | contribs) |
||
Line 10: | Line 10: | ||
*Power source: Four AA alkaline batteries. |
*Power source: Four AA alkaline batteries. |
||
*Battery life: Over 40-36exp. rolls at normal temperature. |
*Battery life: Over 40-36exp. rolls at normal temperature. |
||
− | *Fastening: Attaches to bottom of camera via tripod socket, guide pin |
+ | *Fastening: Attaches to bottom of camera via tripod socket, guide pin alignment at one end. |
*Contacts: A two pin terminal receives prompt from camera. |
*Contacts: A two pin terminal receives prompt from camera. |
||
*Drive: A spring loaded drive coupling connects to the camera's mating driven coupling. |
*Drive: A spring loaded drive coupling connects to the camera's mating driven coupling. |
||
Line 16: | Line 16: | ||
*Weight: Without batteries; 185g (6.5oz.) |
*Weight: Without batteries; 185g (6.5oz.) |
||
*Tripod mount: Standard on bottom of winder. |
*Tripod mount: Standard on bottom of winder. |
||
+ | |||
==Section heading== |
==Section heading== |
||
Revision as of 16:51, 17 August 2014
The Konica Auto Winder F, used in conjunction with the Konica FC-1 or Konica FP-1, makes possible auto-loading and continuous shooting. The Auto Winder has an On/Off switch and can be turned off for manual film advance then turned back on when auto winder function is required.
Specifications:
- Film advance speed: 1.5 frames per second (at shutter speed of 1/125)
- Film rewind: Rewind is manual using the camera's rewind crank lever. Auto winder must be off and release button on bottom of auto winder is depressed.
- Shutter speeds/auto winder compatibility: Including B (bulb), all shutter speeds are possible. (however B is a single shot frame without link up to the AE system).
- Advance indicator: An LED lamp, located adjacent to the winders on/off switch, will illuminate when film is advancing and remains lit when the film roll is completely shot.
- Auto-loading: Started by turning the Auto Winder's power switch ON.
- Power source: Four AA alkaline batteries.
- Battery life: Over 40-36exp. rolls at normal temperature.
- Fastening: Attaches to bottom of camera via tripod socket, guide pin alignment at one end.
- Contacts: A two pin terminal receives prompt from camera.
- Drive: A spring loaded drive coupling connects to the camera's mating driven coupling.
- Dimensions: 141 X 35.5 X 36mm (5.6 X 1.4 X 1.4in.)
- Weight: Without batteries; 185g (6.5oz.)
- Tripod mount: Standard on bottom of winder.
Section heading
Write the second section of your page here.