Fandom

Camerapedia Wiki

Hot shoe

5,980pages on
this wiki
Add New Page
Talk0 Share

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.

Glossary Terms

An accessory shoe is a slot, usually on top of a camera, for mounting accessories such as flashguns, rangefinders, light meters or special viewfinders.

A hot shoe is an accessory shoe with added electrical contacts for flash synchronisation. One contact is a round, central dot, surrounded by plastic, the other is the shoe itself. This allows mounting a flashgun without a synchronisation cable.

It is thought that the first hot shoe appeared on the Univex Mercury, in 1938[1], however hot shoes did not become common until the 1960s. The dimensions of the hot shoe have been standardised, as ISO 518:2006.

Some electronic cameras with dedicated flashguns add extra contacts into the hot shoe to allow the camera and flashgun to communicate, allowing for automatic flash exposure. There is no standardisation between manufacturers for these additional pins or their communication.

Very much later than the introduction of the hot shoe, a plain accessory shoe has become known by the back-formation slang name "cold shoe".

ReferencesEdit

  1. “America’s Challenge to the World’s Finest Cameras” – the UniveX Mercury Model CC, by Dana Kennedy

Links Edit

Also on Fandom

Random Wiki