The Fujifilm nexia Q1 zoom is an APS camera made in China for Fujifilm (Japan). When the camera is turned on, a motorized drive slides the built-in lens cover into the body and the lens automatically protrudes out. Two position zoom function is controlled by a lever behind the shutter release button, left for wide and right for telephoto.
An LCD panel on the back just under the viewfinder will give the following information; Three levels of battery condition display, full, half, need replacement. Film cartridge loaded display with three levels, no display = no film cartridge loaded, steady display = film loaded, blinking display = fully used film cartridge. Frame number. Flash ready symbol, will blink when charging and remain on steady when ready.
Type: Point and Shoot
Film: APS 100-800 ISO
Picture Size: 16.7mm x 30.2mm
Print Format: C type (classic)
Lens: Fujinon zoom lens, 2 components, 2 elements, f=22-44mm 1:8-1:12
Viewfinder: Inverted Galilean viewfinder, 0.38-0.68 X magnification, With AF lamp
Focusing: Active type auto-focus, wide-angle 0.6m (2.0ft.)- inf., telephoto 1.0m (3.3ft.)- inf., with AF lock, AF lamp
Shutter Release: Electronic shutter release, 1/100 sec., 1/30 sec.
Exposure control: 2 zone switching
Film Loading: One touch drop-in loading system, film safety lock system, with mechanical double exposure prevention
Film Advance: Automatic (motorized) film wind and rewind system, provision for mid-roll rewinding (use the mid-roll rewind button)
Flash: Automatic flash, 6 seconds recycle time, with red-eye reduction (LED pre-flash)
Battery: one CR2 lithium
Write the first section of your page here.
Write the second section of your page here.