Ad blocker interference detected!
Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers
Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.
The Canon Wireless Controller LC-2 is a remote control device using infrared rays to control the camera from a distance. The wireless controller LC-2 consists of the transmitter and the receiver and can be used in two modes; first the standard mode, which operates when the transmitter switch is pressed; and second the auto sensing mode, which activates when an object blocks the light path between the transmitter and the receiver . Since the wireless controller has two channels, you can also control two cameras alternately by alternating channels. The receiver can be rotated a full 360° on it's swivel foot to accommodate trigger angle.
- Type: Wireless controller using infrared light emitted by an infrared LED.
- Operating range:
Approx. 5m (16.4ft) in a straight line course without obstacles in the light path. If the angle between the transmitter and receiver is 10°, the range will be approx. 4m (13.1ft). If 20°, then approx. 3m (9.8ft).
- Conditions: Clear weather (with sun no more than 30° from zenith), no obstacles between the transmitter and receiver, and no highly reflective objects in their immediate vicinity.
Standard mode- operates immediately when the transmitter button is pressed. Delay mode- operates two seconds after pressing the transmitter button. Auto sensing mode- operates immediately when an object blocks the light path between the transmitter and the receiver.
- Number of channels: Two (Ch. A and Ch. B)
- Battery life:
Standard and Delay mode: 5000 operations Auto sensing mode: 4hrs at 5m (16.4ft), 12hrs at 4m (13.1ft), 18hrs at 3m (9.8ft)
- Projection angle: 40°
- Reception angle: 100°
- Operation confirmation lamp: Provided on receiver. Confirmed when the operation confirmation lamp (red LED) lights up.
Battery check: Provided on the receiver. Checked by pressing the battery check button.
- Power source:
Transmitter: two AA (1.5V) alkaline batteries. Receiver: one 4LR44 (6V) alkaline or equivalent battery.
Transmitter: 40 X 146 X 18.5mm WHD, (1-9/16 X 5-3/4 X 3/4in) Receiver: 21 X 114 X 40mm WHD, (13/16 X 4-1/2 X 1-9/16in)
Transmitter: 60g (2-1/8oz) Receiver: 70g (2-1/2oz)
- Canon EOS-1
- Canon EOS 5
- Canon EOS A2
- Canon EOS 620
- Canon EOS 630
- Canon EOS 650
- Canon EOS RT
- Canon T50
- Canon T70
- Canon T90