Camerapedia Wiki

Adapt-A-Roll 620

5,981pages on
this wiki
Add New Page
Talk0 Share

The Adapt-A-Roll 620 is an adapter to use type No. 620 film rolls in cameras with Graphic (spring) backs. It was made in sizes to fit 2×3, 3×4, and 4×5in cameras. It was first made by L. Tatro Co. of Culver City, CA, later, without changes, by Ta-Mar Inc., also of Culver City. It was advertised for use on Press cameras.

The AAR 620 must take film up on a 620 spool but will feed film from a 120 spool. A peculiarity of the AAR 620 is that as delivered it takes film up with the emulsion side out; most roll holders take the film up emulsion side in. Some AAR 620s were modified to take film up normally, i.e., emulsion side in; normal AAR 620s hold the film flatter.

The images below show an AAR 620 for 2x3 cameras.

Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.

Also on Fandom

Random Wiki